Your ChalkBlaster V2 is getting close. Not close as in "nice render." Close as in the final printed parts are sitting on the workbench, still warm from the build plate, waiting for one last assembly. This is the version that decides whether we move on to the parts that will actually look and feel like the brush you'll hold at the crag.
Why this is the best part of building ChalkBlaster V2
Paul put it simply when he pulled the parts off the printer: honestly, this is the best part of the process. Months of decisions, the air intake, the I-shape jet fan, the USB-C port under the brush head, all end up in one object you can pick up.
Every V2 prototype so far has been printed in-house on FDM printers. FDM is the workhorse of hardware development. It's fast, it's cheap, and when a part is wrong we can fix the file and have a new one the same day. That speed is how ChalkBlaster went through so many iterations without burning months waiting on suppliers.
But FDM parts have a ceiling. You can see the layer lines. The surface doesn't feel like a finished product. Good enough to answer engineering questions, not good enough to put in a climber's hand and ask "would you buy this?"
What happens after the final FDM prototype?
The next step is a small batch in SLS and SLA, two 3D printing processes that produce parts with no visible layer lines and a smooth finish that looks and feels like injection molding. Those are the parts that go to beta testers and into photos. They're also slower and more expensive to order than a print on our own bench.
So before we hit "order," the FDM version has to prove the design is right. Anything we miss now gets baked into a batch of parts we can't fix overnight.
What we check on the last ChalkBlaster V2 prototype
Fitment. Every part has to go together the way it will on the real thing. The brush head has to click on and seal over the charging port. The handle halves have to close without gaps where chalk can creep in. A fraction of a millimeter off on the intake and you hear it the moment the motor spins up.
Functionality. The jet fan runs, the air path flows the way the CAD said it would, the button responds, the battery charges. This is where a nice-looking prototype turns into a working one, or doesn't.
Real-world feel. This is the one you can't simulate. How heavy does it feel at the end of your arm? Does your thumb land on the button without looking? Does it sit right in the chalk bag? We only find that out by holding it, passing it around, and using it on actual holds.
Fast and cheap to change
Visible layer lines
Answers: does it fit and work?
This is the last one
Slower and costlier to change
Smooth, no visible layer lines
Looks and feels like the real product
Goes to beta testers
Why we don't skip straight to the nice parts
It's tempting. The SLS/SLA parts look great, and a beautiful prototype feels like progress. But a beautiful part with a fit problem is still a fit problem, now with a bigger bill attached. Doing the boring check on the ugly version first is cheaper, faster, and it's the reason the version you eventually hold works the first time you press the button.
It's the same approach that got ChalkBlaster V1 into climbers' hands: build it, hold it, test it, fix it, then commit. No shortcuts on the hard parts.
What this means for your ChalkBlaster
When V2 reaches you, the parts you won't notice are the ones we sweated most. The head clicks on cleanly and keeps chalk out of the charging port. The handle closes tight. The brush sits in your hand the way it should between attempts, so you clean the hold, put it back in the bag and pull on. All of that gets locked in on this last printed prototype.
Paul, with the parts fresh off the printer: "One last assembly. One last check. If you're serious about hardware, you can't skip the hard parts."
Quick answers
Is ChalkBlaster V2 finished?
The design is in its final prototype stage. Next comes a small SLS/SLA batch, then beta testers.
What's the difference between FDM and SLS/SLA?
FDM builds parts from melted plastic layer by layer, so you see the lines. SLS and SLA use lasers on powder or resin and give a smooth surface that looks like an injection-molded product.
Why not go straight to the smooth parts?
Because changes are fast and cheap on FDM, and slow and expensive after you order a batch. We fix everything we can while it's still cheap to fix.
ACRUX builds tools for climbers who take friction seriously.